:	Mar 23, 2005

:

Note: Ignition coils 2 ,3, 5 & 6 have harness retaining clips that need to be detached before removal.

.

Disconnect the battery ground cable.

.

Remove the engine cover.

.

Disconnect the ignition lead from the coil.

.

Remove the ignition coil.   Disconnect the ignition coil electrical connector.   Remove the nut.   Remove the ground cable.   Fully loosen the stud.   Fully loosen the bolt.

.

To install, reverse the removal procedure.   Tighten the bolt to 6 Nm (4 lb.ft).   Tighten the stud to 6 Nm (4 lb.ft).   Install the ground cable.   Tighten the nut to 6 Nm (4 lb.ft).   Connect the ignition coil electrical connector.   Connect the ignition lead to the coil.